CISCO GLC-LH-SMD SFP (mini-GBIC) Transceiver Module

Features and benefits of CISCO GLC-LH-SMD
● Hot swappable to maximize uptime and simplify serviceability
● Flexibility of media and interface choice on a port-by-port basis, so you can “pay as you populate”
● Robust design for enhanced reliability
● Supports Digital Optical Monitoring (DOM) capability

1000BASE-T SFP for copper networks
The 1000BASE-T SFP operates on standard Category 5 unshielded twisted-pair copper cabling of link lengths up to 100 m (328 ft). Cisco 1000BASE-T SFP modules support 10/100/1000 auto negotiation and Auto MDI/MDIX.

1000BASE-SX SFP for multimode fiber only
The 1000BASE-SX SFP, compatible with the IEEE 802.3z 1000BASE-SX standard, operates on legacy 50 μm multimode fiber links up to 550 m and on 62.5 μm Fiber Distributed Data Interface (FDDI)-grade multimode fibers up to 220 m. It can support up to 1km over laser-optimized 50 μm multimode fiber cable.

1000BASE-LX/LH SFP for both multimode and single-mode fibers
The 1000BASE-LX/LH SFP, compatible with the IEEE 802.3z 1000BASE-LX standard, operates on standard single-mode fiber-optic link spans of up to 10 km and up to 550 m on any multimode fibers. When used over legacy multimode fiber type, the transmitter should be coupled through a mode conditioning patch cable. For details on this implementation, refer to https://www.cisco.com/en/US/prod/collateral/modules/ps5455/product_bulletin_c25-530836.html.

1000BASE-EX SFP for long-reach single-mode fibers
The 1000BASE-EX SFP operates on standard single-mode fiber-optic link spans of up to 40 km in length. A 5-dB inline optical attenuator should be inserted between the fiber-optic cable and the receiving port on the SFP at each end of the link for back-to-back connectivity.

1000BASE-ZX SFP for long-reach single-mode fibers
The 1000BASE-ZX SFP operates on standard single-mode fiber-optic link spans of up to approximately 70 km in length. The CISCO GLC-LH-SMD SFP provides an optical link budget of 21 dB, but the precise link span length depends on multiple factors such as fiber quality, number of splices, and connectors.

When shorter distances of Single-Mode Fiber (SMF), CISCO GLC-LH-SMD, are used, it might be necessary to insert an inline optical attenuator in the link to avoid overloading the receiver. A 10-dB inline optical attenuator should be inserted between the fiber-optic cable plant and the receiving port on the SFP at each end of the link whenever the fiber-optic cable span loss is less than 8 dB.

100/1000BASE-LX SFP for long-reach single-mode fibers
The dual-rate 100M/1G 10Km SFP is interoperable with the IEEE 100BASE-LX and 1000BASE-LX/LH standards.

The GLC-GE-DR-LX SFP also supports Digital Optical Monitoring (DOM) functions according to the industry-standard SFF-8472 Multisource Agreement (MSA). This feature gives the end user the ability to monitor real-time parameters of the SFP, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage.

Cisco SFP Operation at 100M
The GLC-GE-DR-LX SFP can interoperate with other 100M SFPs/interfaces as long as those are based on the 100BASE-LX10 standard. A 5dB attenuator is needed on the path of dual-rate SFP Tx and 100BASE-LX10 interface Rx. No attenuator is needed on the other fiber strand.

SFP Operation at 1G
The GLC-GE-DR-LX SFP can interoperate with other 1G SFPs/interfaces as long as those are based on 1000BASE-LX/LH standard. No attenuator is needed in any fiber strand.

1000BASE-BX10-D and 1000BASE-BX10-U SFP for single-fiber bidirectional applications
The 1000BASE-BX-D and 1000BASE-BX-U SFPs, compatible with the IEEE 802.3ah 1000BASE-BX10-D and 1000BASE-BX10-U standards, operate on a single strand of standard SMF.

A 1000BASE-BX10-D device is always connected to a 1000BASE-BX10-U device with a single strand of standard SMF with an operating transmission range of up to 10 km. The communication over a single strand of fiber is achieved by separating the transmission wavelength of the two devices as depicted in Figure 2: 1000BASE-BX10-D transmits a 1490-nm channel and receives a 1310-nm signal, whereas 1000BASE-BX10-U transmits at a 1310-nm wavelength and receives a 1490-nm signal. As shown, the presence of a Wavelength-Division Multiplexing (WDM) splitter integrated into the SFP to split the 1310-nm and 1490-nm light paths.

Brand

Cisco

Cisco Enterprise and  small business solutions; Network Routing, Switching, IP-Telephony, and Security

Tdk Solutions Limited is a cisco dealer and reseller in Kenya and we offer Cisco Networking Solutions Suitable for Enterprise and small businesses in Kenya, Rwanda, Uganda, Tanzania, and the larger sub-Saharan Africa;

Cisco Networking Switches;

Cisco offers networking switches- from small business switching to Enterprise and data center solutions,  Cisco switches are reliable, scalable, secure, and cost-efficient, delivering high performance and security to meet the demand of any size of business. - They are Catalyst Series 2960X, 3650, 3850, 9000, Nexus series, check out the cisco switches guide

Cisco Routers

Cisco routers offer Securely connecting your small business to the outside world is as important as connecting your internal network devices to one another.  Cisco routing provides intent-based networking for the WAN, LAN, and cloud. Cisco Kenya routers include advanced analytics, application optimization, automated provisioning, and integrated security to deliver a complete, proven solution.

Cisco Unified Communication, Confrencing and Telephony services 

Cisco through integrated service Routers, POE Switches and   IP phones offer unmatched future-proof telephony and unified communication solutions for small to very large businesses, CISCO IP Telephony Kenya offers cost-effective, reliable, secure, and scalable high-quality voice over IP (VoIP) communications on all models.

Cisco Network Security solutions, Firewalls, Cloud, and End Point protection

Cisco offers secure network security suitable for kind of business the   1000 Series Best for smaller businesses and branch offices and 2100 Series, Ideal for larger branch offices and medium-sized organizations. For enterprise, data center, and cloud Cisco Offers 4100 and 9300Meraki Security series Optimized for service providers and high-performance data centers.

Cisco Wireless Access points and Wi-Fi management Solutions

Cisco Wireless solutions offer unmatched security, Control, and network administration through WIFI Access points, Cloud-managed Network Access Points, Network Controllers and managed. That lets you Operate your network with simple, flexible, and high security